Description
AR15 7.5″ 223 & 7.5″ 300 BLACKOUT DUAL CALIBER TAKEDOWN PISTOL SYSTEM BLACK
MILSPEC UPPER
- US made in Scottsdale, Arizona
- T6061 billet
- manufactured from solid block of billet aluminum
- Forward assist
- Dust cover
- mil-a-8625 type iii anodizing
300 BO BARREL
- 7.5” heavy barrel
- CHROME LINED
- 0.75” Gas Block
- PISTOL length gas tube
- 5/8×24 muzzle thread pitch
- 1:8 TWIST
- M4 feed ramp
223 WYLDE BARREL
- 7.5” heavy barrel
- CHROME LINED
- 0.75” Gas Block
- PISTOL length gas tube
- 1/2X28 muzzle thread pitch
- 1:8 TWIST
- M4 feed ramp
HANDGUARD
- 7” keymod Handguard
- Steel Barrel nut
- T-markings on top rail
- Ultra-Light weight
BOLT CARRIER GROUP
- Nitride Finish
- HPT/MPI Tested and Marked
- 9310 Hardened Steel Bolt
- 17-4 Stainless Steel Firing Pin (Heat treated to H900 Condition)
- 8620 carrier and gas key
- Hardened extractor S7 tool steel
- The group comes fully assembled with properly torqued and staked gas key
- Made in the USA
- Ambi charging handle
MUZZLE DEVICE
- Crown style
- US Made
- STEEL
BILLET LOWER RECEIVER
- Machined from 7075-T6 aircraft grade aluminum
- Precision broached magazine well with beveled feed lips
- Machined and engraved to be compatible with 45 and 60-degree short throw fire control selectors
- Enlarged trigger guard for winter gloved shooting
- tension screw to eliminate movement between upper/lower
- finger rests by the mag-release and bolt catch
- Manufactured to MILSPEC on state-of-the-art CNC equipment for consistent quality parts and exacting tolerances
- MILSPEC
Due to COVID 19 the material supply chains have been extremely depleted. The depletion of materials is causing a huge delay in manufacturing and production. Current lead times are running a MINIMUM of 12-15 weeks for all AR15 lower receivers. Demand is increasing daily; we recommend that if you do want a product to go ahead and reserve yours on backorder now. As for now, we are not sure when the material supply chains will be operating at full force again.
TRIGGER
- Standard milspec trigger
- Stainless steel fire control group
LAW TACTICAL GEN3 AR15 FOLDING STOCK HINGE
DOLOS BARREL QUICK DETACH SYSTEM
- A Dolos equipped rifle can be ready to stop long distance threats and save lives in less than 10 seconds.
- The Dolos enables you to pack any AR into a very small package. It is easy to transport on a motorcycle or any small vehicle.
- Backpacking
- Bugout bag
- Active shooter response
- When you want to legally carry or transport a rifle without fear of harassment, intimidation or arrest
SB TACTICAL SBA3 BRACE
- Designed for all platforms capable of accepting a mil-spec carbine receiver extension, the SBA3 is 5-position adjustable, dramatically enhances versatility, and features a minimalist design with an integral, ambidextrous QD sling socket
HOGUE PISTOL GRIP
- This Hogue AR-15 Pistol Grip is constructed from a sturdy fiberglass and then over-molded with soft rubber for Hogue’s famous durable, comfortable and secure grip. Fits firearms with standard righthand safeties only, will not fit firearms with an ambidextrous safety. Features a cobblestone finish, finger grooves, beavertail and dual palm swells for ease of handling and comfort in all situations. Mounting hardware not included
Vortex SPARC AR RED DOT
- Get on target quickly with the Sparc AR Red Dot Sight from Vortex Optics. Utilizing a 2 MOA bright red dot, this nitrogen-filled, waterproof, and fog-proof sight offers 10 brightness settings. It’s compatible with Picatinny and Weaver rails and features two height settings to make sure your red dot aligns properly with your back-up iron sights. All air-to-glass surfaces have multiple anti-reflective coatings for optimal light transmission. Rear-facing digital controls make it easy to control the brightness; the unit automatically returns to the last-used setting the next time it is powered up. It shuts down automatically after 12 hours to preserve the life of the AAA battery. The Sparc AR employs 1 MOA-per-click adjustments and can be adjusted up to 90 MOA for windage and elevation
Optical Performance
- 1x magnification, 22mm objective lens
- Fully multi-coated optics
- Unlimited eye relief
- 2 MOA illuminated red dot
- Bright red dot highly visible in daylight
- Use and Handling
- Ten brightness settings (lowest two are night-vision compatible)
- Multi-height adjustment system provides lower 1/3 co-witness (40mm) and absolute co-witness (37mm)
- 1 MOA adjustment
- 90 MOA maximum windage & elevation adjustments
- Construction Details
- Nitrogen-filled and O-ring-sealed to be waterproof and fog proof
- Hard-anodized low-glare matte finish
Condition 1 Medium-Sized Hard Case
- Made of super-high-impact polypropylene copolymer
- Offers innovative features for unmatched strength and durability in protecting your guns, electronics, photo/video equipment or anything that needs a second skin
- Tongue and groove O-ring seal paired with bi-directional pressure equalization valve make a dustproof and waterproof seal up to 3′ depth (IP67), protecting your equipment from damaging humidity and dust
- custom laser cut and engraved high density foam for maximum protection of all parts
- Handle, latches and hinges use stainless steel pins for added resilience
- Patent-pending spring release latches lock in place for a secure closure yet allow quick and easy opening
- Large grip handles provide added comfort when carrying heavy items
- Finger grooves on each side of the case allow for easy carry of stacked cases
- Lid and base have interlocking ridges and channels to enable movement-free
- The Condition 1 101075 Medium-Sized Hard Case is an air-tight and water-tight. Virtually indestructible, this rugged hard case from Condition 1 features an O-ring seal, spring release latches that lock in place, lock holders and a pressure equalization valve
INCLUDED:
2 X 30 round custom laser engraved PMAG
Reviews
There are no reviews yet.