Name: Buy AR15 20" 6.5 GRENDEL & 20" 223 WYLDE STAINLESS DUAL CALIBER PRECISION RIFLE SYSTEM Online - Tactical Skeleton Shop
Price: 3299.99 USD
Availability: InStock

Description

AR15 20″ 6.5 GRENDEL & 20″ 223 WYLDE STAINLESS DUAL CALIBER PRECISION RIFLE SYSTEM

BILLET UPPER

US made in USA
T6061 billet
1913 picatinny rail flat top-DPMS low spec rail height
mil-a-8625 type iii anodizing
223 WYLDE engraved dust cover
6.5 GRENDEL engraved dust cover

6.5 GRENDEL BARREL

20” MATCH GRADE STAINLESS HBAR barrel
RIFLE length gas tube
Straight fluted for maximum heat dissipation
416R SS / CHROME LINED
5/8×24 muzzle thread pitch
1:8 TWIST
M4 feed ramp

223 WYLDE BARREL

20” MATCH GRADE HBAR barrel
RIFLE length gas tube
416R SS / CHROME LINED
5/8×24 muzzle thread pitch
1:8 TWIST
M4 feed ramp

HANDGUARD

15” MILSPEC SKELETON Handguard
KEYMOD SYSTEM with three sectional rails installed
ULTRA LIGHT WEIGHT
4 X QD SLING MOUNTING POINTS

BOLT CARRIER GROUPS

HPT/MPI Tested and Marked
9310 Hardened Steel Bolt
NICKEL BORON COATING
17-4 Stainless Steel Firing Pin (Heat treated to H900 Condition)
8620 carrier and gas key
Hardened extractor S7 tool steel
The group comes fully assembled with properly torqued and staked gas key
Made in the USA

(TWO BCGs ARE included with the AR15 SYSTEM, ONE PER CALIBER)

2 X AMBI CHARGING HANDLES INCLUDED WITH EACH UPPER + 1 EXTRA

MUZZLE DEVICE

CROWN SS style
side ports for recoil reduction

BILLET LOWER RECEIVER

Machined from 7075-T6 aircraft grade billet aluminum
Matte black hard-coat anodized per Mil 8625 Type 3 Class 2
Precision broached magazine well with beveled feed lips
Machined and engraved to be compatible with 45 and 60-degree short throw fire control selectors
Upper tension screw behind grip screw (threaded hole with hardware included) to adjust any “slop” out of vertical fit between upper and lower
Ambidextrous trigger finger rests with grooves (above and below mag release / mag catch)
Compatible with Norgon and other aftermarket ambidextrous mag releases
Threaded bolt catch pin (Threaded hole and hardware)
Integrated large opening “winter” trigger guard
Manufactured to MILSPEC on state-of-the-art CNC equipment for consistent quality parts and exacting tolerances

TRIGGER

standard milspec trigger

LUTHAR BLACK MBA3 STOCK

Fully adjustable carbine buttstock assembly to mount to a carbine rifle (6-positions mil-spec or commercial tube) – this is our carbine stock
additional 1″ height on cheek rest
3-axis adjustable butt plate assembly extends additional 1 1/16″ length of pull and includes the following movement:
1. horizontal for linear adjustment (i.e. length of pull)
2. vertical for a perfect butt plate fit into the curvature of the shoulder.
3. lateral adjustment for a ½ inch left or right cast
4. this butt plate assembly is interchangeable with the original mba-1 buttstock
Includes a picatinny rail on the bottom rear of the stock body to attach your choice of many accessories.
Designed a flat bottom index set screw (10-24) to eliminate that constant rattle of carbine collapsible buttstock. this also allows you to secure the stock in your favorite position.
The black mba-3 comes with a medium soft rubber recoil pad, duro 85
The LUTHAR mba-3 weighs roughly half that of comparable stocks coming in at just 18.5 ounces.
Fits all .223 and most .308 AR carbine style rifles
Super strong glass filled nylon
Easy to replace and quick to install
Uses 4 out of the 6 positions on a mil-spec or commercial tube

FEATURES

ergonomic
adapts to existing commercial and mil-spec buffer tubes
certain aftermarket commercial buffer tubes that exceed 1.172″ may not fit
the vertical struts for the MBA 3 are fixed therefore the cheek pc is not reversible like the MBA 1 however the cheek piece itself is designed with a cheek pad for the lefty

44” BLACK Flight Case

Made from tough light-weight polypropylene copolymer
Has a rugged o-ring seal that makes it air and water tight up to 3ft deep
Custom laser cut foam to hold all components of the system firm in place and provide maximum protection
Utilize an automatic pressure release valve so that it adjusts to its environment
ATA/TSA ready for airline travel
Lockable with comfort molded handles and spring-loaded latches
include heavy-duty off-road wheels and a second handle
Made in the USA

Vortex Crossfire II 3-24×56 Scope:

OPTICAL FEATURES

Fully Multi-Coated Increases light transmission with multiple anti-reflective coatings on all air-to-glass surfaces
Second Focal Plane Reticle Scale of reticle maintains the same ideally-sized appearance. Listed reticle sub tensions used for estimating range, holdover and wind drift correction are accurate at the highest magnification
Illuminated Center Dot Provides a precise aiming point under low-light conditions

CONSTRUCTION FEATURES

Tube Size 30 mm diameter
Single-Piece Tube Maximizes alignment for improved accuracy and optimum visual performance, as well as ensures strength and waterproofness
Aircraft-Grade Aluminum Constructed from a solid block of aircraft-grade aluminum for strength and rigidity
Waterproof O-ring seals prevent moisture, dust and debris from penetrating the riflescope for reliable performance in all environments
Fog-proof Nitrogen gas purging prevents internal fogging over a wide range of temperatures
Shockproof Rugged construction withstands recoil and impact
Hard Anodized Finish Highly durable low-glare matte finish helps camouflage the shooter’s position
Capped Reset Turrets Allow re-indexing of the turret to zero after sighting in the riflescope. Caps provide external protection for turret
Adjustable Objective Adjustment for riflescope’s objective lens provides image focus and parallax removal

SPECIFICATIONS

Magnification	3-12 x
Objective Lens Diameter	56 mm
Eye Relief	3.5 inches
Field of View	36.7-9.2 feet/100 yards
Tube Size	30 mm
Turret Style	Capped
Adjustment Graduation	1/4 MOA
Travel per Rotation	15 MOA
Max Elevation Adjustment	60 MOA
Max Windage Adjustment	60 MOA
Parallax Setting	10 yards to infinity
Length	14.3 inches
Weight	21.1 ounces